PLA 2.85 white 10 kg, roll for large printers, material easy to print, easy to model (product finish), hard, not resistant to outdoor conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and its price. For the complete guide to all raw materials, click here.<\/a><\/p>\n 195-220 degrees to the printer head (nozzle)
\nCorn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
\n PLA is a hard but brittle material.
\n In outdoor conditions, the corners sometimes warp (depending on thickness and heat). If the product is fully finished (finished with automotive materials), it is resistant to outdoor conditions.
\n The additives in PLA PRO or PLA + or T ough PLA, which are the same terms, contain additives so that it is 10 degrees more durable and less brittle than regular PLA.<\/span><\/p>\nPrinting temperature PLA 2.85 white 10 kg<\/h2>\n
\n Work surface temperature \u2013 60 degrees.
\n Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
\n For a very large product (about 100 hours of printing), it is recommended to add glue and lower the bed temperature.
\n Fans: 100%
\n If you are interested in smaller wheels, type 1 kg 2.85<\/a><\/p>\n