AXIA 2770 Threadlocker

Product Description
High strength, medium viscosity and excellent chemical resistance. Suitable for use on active metals.
Surfaces and adjustable. Fits connectors between M24 and M36. Heat the locked parts for disassembly.

Designed for permanent locking and sealing of threads

• Connectors
• Mounting screws on motors, pumps, etc.
• Swinging nuts
• Driveshaft connectors
• Gearbox bolts
• Conveyor screws
• Construction equipment screws

Instructions for use of AXIA 2770 Threadlocker adhesive:

The surface must be free of oil and dust.
Apply a small amount of glue to one surface, attach the parts and hold them together until fixed.
Clean the mouthpiece, close the lid and store in a cool, dry and shaded place after use.
The glued parts can be used after 24 hours of drying.
Avoid prolonged inhalation of fumes, work in a ventilated and open place.

In most cases in 3D printing the thick glue is more suitable.

If the thinner glue is required, click here..

Characteristics before drying

Base resin: Dimethacrylate ester
Color : Red
Viscosity (cps @ 22℃) 7,000
Drying speed (fixture/full, minutes/hours @ 22℃) 20-60/24
Gap filling (mm): 0.25
Specific gravity @ 22℃ 1.12
Flash point (℃)> 93

Characteristics after drying

Operating temperature range (℃) -60 to 150
Locking Strength (Break/Sign, Kgf·㎝@ 22℃) 360/300
Good solvent resistance
Testing standard JB/T7311-2001