BambuLab H2C Combo

BambuLab H2C Combo Printer

Pre-sale promotion! Purchase a Bambu Lab H2C printer and receive a 4-color pack of PLA to choose from!!!

With the Vortex system – automatic head replacement, true multi-material printing that reduces production processes

The Vortek Hotend Change System allows you to work with up to 7 materials or colors in a single print. This means: producing complex parts in one operation instead of multiple steps. No need for separate assemblies, gluing or printing → fewer defective parts and less excess inventory.

Purge Saving technology significantly reduces the amount of plastic wasted when switching between colors/materials → fewer purge towers, less material thrown away, lower printing cost (especially in color and multi-material printing).

Smart printing that prevents errors and saves material

An artificial intelligence system with 59 sensors and four cameras monitors printing in real time, identifies failures early, stops processes in the event of a malfunction, and performs self-calibration → failed prints are avoided, material and work hours are saved.

The print nozzle camera – a smart camera with a macro lens + AI continuously monitors print patterns, identifying material buildup, filament deviations, and extrusion faults.

Stable printing environment for engineering materials

Active heating chamber up to 65°C + closed fireproof enclosure → stable conditions, less distortion, fewer reprints.

High accuracy that reduces reprints

50 micron motion accuracy (thanks to PMSM Servo motors + Vision Encoder) → Accurate parts from the first print. The Vision Encoder enables distance-independent accuracy of less than 50 microns (thinner than a human hair). Automatic calibration compensates for mechanical variations → Consistent accuracy over time.

Who is this suitable for?

Businesses that want to reduce material costs, color printing studios, product developers and prototypers, small series manufacturers who need high efficiency and accuracy.

Technology that enables high-quality printing + a more economical, efficient and environmentally friendly production process.

Combo H2C version

Comes with AMS 2 Pro – an automated material management system with active drying

• Filament drying at 65°C with active vents
• Airtight storage
• Printing with up to 24 different colors/materials
• Brushless feed motor
• Filament synchronization via RFID

Enclosed structure for high-performance printing

Closed structure + adaptive airflow → stable chamber temperature for advanced materials + air filtration for a clean and safe environment.

Fully automatic calibration of nozzle offset Fully automatic inductive calibration (no manual steps, no calibration plates) → accuracy up to 25 microns in just a few minutes.

Bambulab H2C Technical Specifications

Print volume:

• Single nozzle: 305 × 320 × 325 mm
• Two nozzles: 300 × 320 × 325 mm
• Total volume (for two nozzles): 330 × 320 × 325 mm

Temperatures:

• Max nozzle: 350°C
• Max. print surface: 120°C
• Active chamber heating: 65°C

Standard nozzle diameters: 0.2 | 0.4 | 0.6 | 0.8 mm

Built-in systems:

• Internal filament cutter
• Air purification system
• Cooling system with closed loop control

Cameras and sensors:

• Live View: 1920×1080
• DIZA camera: 1920×1080
• BirdsEye: 3264×2448
• Printhead camera: 1920×1080
• Door sensor
• Filament end sensor
• Filament tangle sensor
• Filament movement measurement (Odometry)
• Resumption of printing after a power outage