TR300
Phrozen TR300 Gray - Frozen - Image 2
Phrozen TR300 Gray - Frozen - Image 3
Phrozen TR300 Gray - Frozen - Image 4
TR300

Phrozen TR300 Gray – Frozen

₪450.0

Phrozen TR300 Gray resin – frozen

Resin in a 1 liter package, material for rubber molds for jewelry or metals, strong and heat-resistant at 220 degrees.

Suitable for all 405 wavelength printers.

Resin properties:

  • Viscosity Viscosity – 160 (250C)
  • Tg – 220 ° C
  • Shore Hardness Hardness: 80 D
  • Density Density: 1.1
  • Elongation Elongation – 2%
  • Tensile Stress Coefficient of Stretching: 32 MPa (Mega Pascal)
  • I-Zod Impact Direct Impact Force: 8 KJ / m2

Out of stock

Delivery 7 days

› Delivery within 7 business days:
(Moshavim, Kibbutzim, the Triangle, Judea and Samaria, Golan Heights, Eilat and East Jerusalem)
› Receive an SMS on the day of delivery + a call before arrival

Description

Phrozen TR300 Gray resin high temp Resin – Frozen

Frozen TR300 from the company comes in a 1 liter package.

This resin is used for rubber molds for jewelry or metals.

The Resin is considered to be the highest Ultra high temp resin of Phrozen3D quite strong and resistant to a very high heat of 220 degrees.

Can be used for mechanical products very close to Rock Black Stiff Resin , which has much higher heat resistance than most simple materials.

TR300 resin properties:

  • Viscosity Viscosity – 160 (250C)
  • Tg – 220 ° C
  • Shore Hardness Hardness: 80 D
  • Density Density: 1.1
  • Elongation Elongation – 2%
  • Tensile Stress Coefficient of Stretching: 32 MPa (Mega Pascal)
  • I-Zod Impact Direct Impact Force: 8 KJ / m2

Can be printed on any printer with a wavelength of 405um.

Phrozen TR300 Gray resin Suitable for products that require mechanical strength in addition to high temp Resin.

The cleaning of the material in IPA is 99.8% concentrated.
You can sign up for free basic training here
For high-quality printing in frozen TR300 resin, it is recommended to observe the following rules:
  • After printing did not leave in IPA for a long time
  • Mix well before use
  • If the resin has touched a hand or eyes, it is recommended to rinse with plenty of water
  • If the print printing fails, it is recommended to filter with a color filter to avoid lumps.
  • Wear gloves and a mask
To register for the Facebook group managed by us – 3D printer jewelers and goldsmiths – the official group
For a consultation call: Moral – 0508223065

good to know

› Rolls or Resin

Half a year from the opening date

› Printers

One-year warranty in our laboratory, excluding consumables.

› 7 business day delivery (to most areas)
› Delivery within 7 business days:
(Moshavim, Kibbutzim, Triangle, Beyond the Green Line, Golan Heights, Eilat and East Jerusalem)
› Receive an SMS on the day of delivery + a call before arrival