TR250
Phrozen TR250 Gray - Frozen - Image 2
Phrozen TR250 Gray - Frozen - Image 3
Phrozen TR250 Gray - Frozen - Image 4
TR250

Phrozen TR250 Gray – Frozen

₪350.0

Phrozen TR250 Gray resin – frozen

Resin in a 1 liter package, material for rubber molds for jewelry quite strong and heat resistant to 100 degrees.

The shade of the resin is light gray

Suitable for all printers – Sonic mini 4K , Sonic Mighty 4K , Sonic XL , Sonic Mega , Sonic Mini

Material properties:

  • Viscosity Viscosity – 706 mPa.S (25C)
  • Tg – 100 ° C
  • Shore Hardness Hardness: 85 D
  • Density Compression: 1.12
  • Elongation Elongation – 1 %
  • Tensile Stress Coefficient of Stretching: 11 MPa (Mega Pascal)
  • I-Zod Impact Direct Impact Force: 3.05 KJ / m2

13 in stock

Delivery 7 days

› Delivery within 7 business days:
(Moshavim, Kibbutzim, the Triangle, Judea and Samaria, Golan Heights, Eilat and East Jerusalem)
› Receive an SMS on the day of delivery + a call before arrival

Description

Phrozen TR250 Gray resin – frozen

TR250 resin from the Frozen company comes in a 1 liter package, and is used for rubber molds for jewelry that is quite strong and heat resistant.

The shade of the resin is light gray. (not the same as the picture)

Can be used for mechanical products but is not as strong Rock black stiff Resin .

Suitable for all printers – Sonic mini 4K , Sonic Mighty 4K , Sonic XL , Sonic Mega , Sonic Mini

Material properties:

  • Viscosity Viscosity – 706 mPa.S (25C)
  • Tg – 100 ° C
  • Shore Hardness Hardness: 85 D
  • Density Compression: 1.12
  • Elongation Elongation – 1 %
  • Tensile Stress Coefficient of Stretching: 11 MPa (Mega Pascal)
  • I-Zod Impact Direct Impact Force: 3.05 KJ / m2

Can be printed on any printer with a wavelength of 405um.

Phrozen TR250 Gray resin Suitable for products that require mechanical or rubber strength for jewelry (not at temperatures above 100 degrees to higher TR300 is recommended).

Cleaning the material with 99.8% concentrated IPA.
You can sign up for free basic training here
For high-quality printing in TR250 frozen material, it is recommended to observe the following rules:
  • At the end of the print did not leave too much time in the IPA
  • Mix well before use.
  • Keep away from children
  • If the resin touches your hands or eyes, it is recommended to wash with plenty of water.
  • If the resin print fails, it is recommended to filter with a color filter to prevent clumps.
  • Gloves and a mask must be worn.
To register for the Facebook group managed by us – 3D printer jewelers and goldsmiths – the official group
For a consultation call: Moral – 0508223065

good to know

› Rolls or Resin

Half a year from the opening date

› Printers

One-year warranty in our laboratory, excluding consumables.

› 7 business day delivery (to most areas)
› Delivery within 7 business days:
(Moshavim, Kibbutzim, Triangle, Beyond the Green Line, Golan Heights, Eilat and East Jerusalem)
› Receive an SMS on the day of delivery + a call before arrival