PLA Silver Pro 1.75mm

PLA silver pro

PLA Silver Pro is a material that is easy to print, easy to model (product finish), rigid, not resistant to outdoor conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and its price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and 30% stronger than regular PLA.

As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength.

In general, PLA PRO silver has a beautiful shade and is not as fragile as SILK silver, if you need more shine and the strength is less important, you can purchase SILK silver .

For the complete guide to all raw materials, click here.

PLA Silver Printing Temperature
195-220 degrees to the printer head (nozzle)
Work surface temperature – 60 degrees.
Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
For a very large product (about 100 hours of printing), it is recommended to add glue and lower the bed temperature.
Fans: 100%

To our Facebook page