PC – Polycarbonate 3d Print natural – natural polycarbonate

PC – Polycarbonate 3d Print 1.75mm natural – natural polycarbonate

PC – Polycarbonate filament is a very strong and highly heat-resistant material, usually not suitable for home printers.

This product is PURE natural and therefore of higher quality and is not subject to breakage from high heat. Please be careful of materials that are not natural.

This filament absorbs a lot of moisture quickly, so immediately after opening, it is recommended to place it in sealed boxes and vacuum bags for storage.

In order to print in the best and most efficient way with the best results, it is recommended to print this on a printer with a closed print bed and chamber. The most important thing in this case is a high bed temperature and a high-heat-resistant extruder.

This filament requires very high temperatures for printing, so separate layers will appear if printed at low temperatures or rapid and extreme cooling.

Comes in a weight of 1 kg and a diameter of 1.75 mm.

Printing recommendations:

Nozzle temperature: between 250-300°C. Make sure the extruder can withstand these temperatures and is made of solid metal.

Surface or bed temperature: between 80-120°C. Ensure high surface/bed temperature and it is recommended to use PEI or glue.

Cooling: Cooling is not necessary and may even ruin prints with this material.