Phrozen Cure Plus

**Phrozen Cure Plus** (or **Phrozen Cure+**) is an advanced post-curing station from Phrozen, specifically designed to complete the printing process in 3D resin printers. After rinsing, the parts still do not reach their final mechanical strength, stability and quality – **Phrozen Cure Plus** performs full and uniform polymerization using multi-spectral UV + controlled heating.

Designed primarily for professional users:

– Dental laboratories

– Jewelry studios and jewelry making

– Engineering prototyping

– Manufacturing precise functional parts

#### Why is Post-Curing with Phrozen Cure Plus so critical?

Without supplementary hardening, resin prints suffer from:

– Excessive softness or brittleness

– Lower than expected mechanical strength

– Decreased stability over time

– Failure to meet biocompatibility standards (especially in dental)

**+Phrozen Cure** solves these problems thanks to powerful **Flash Curing** technology + heating up to 60°C that significantly improves the final results.

#### Key Features of Phrozen Cure Plus

– **Tri-spectral UV system** – 365nm + 385nm + 405nm

Allows perfect compatibility with most types of resins, including dental, biocompatible and advanced engineering resins.

– **Flash Curing** at high intensity – rapid and uniform hardening within a few minutes (usually only 5–10 minutes).

– **Controlled heating up to 60°C** – improves deep polymerization and increases mechanical strength and thermal resistance.

– **360° reflective cell** – uniform UV radiation from all directions → no unhardened or weak areas.

– **Friendly 5-inch touchscreen** – Pre-prepared profiles for different sharpeners + precise manual settings.

#### Phrozen Cure Plus Technical Specifications (2025–2026)

– LED wavelengths: 365 / 385 / 405 nm

– Total LED power: ~110W (36 LED lights)

– Heating power: ~80W

– Maximum heating temperature: 60°C

– Hardening volume: approx. 12 × 12 × 5 cm

– Device dimensions: approx. 23 × 33.5 × 26 cm

– Weight: about 7.3 kg

– Voltage: 100–240V, 50/60Hz

– Total power: approx. 150–190W

– Suitable for continuous professional use

Common uses of Phrozen Cure+

– **Dental** – Models, molds, temporary crowns, orthodontic braces, gingival masks, surgical models

– **Jewelry** – Wax models, investment molds

– **Engineering and Prototyping** – Functional parts, mechanical testing

– **Medicine and Orthopedics** – Anatomical models, custom accessories

**Phrozen Cure** is currently one of the most affordable and reliable post-curing units in the dental and professional market – especially when combined with Phrozen Sonic LS+, Sonic Mega, and more printers.

Want to upgrade the quality of your resin impressions? **Phrozen Cure Plus** provides consistent, safe results with a high level of biocompatibility – without compromise.

Highly recommended for dental laboratories and professionals looking for a reliable and inexpensive solution.
If there is no need for a stronger wavelength hardening (dental or engineering), you can buy the simpler Phrozen wash and cure model.