To the main store page

Phrozen Sonic Mega 8KS Set

Original price was: ₪13,800.0.Current price is: ₪12,500.0.

Phrozen Sonic Mega 8KS Set


The set includes everything you need to print

A set that includes:

Mega 8KS + Mega Wash + Mega cure S

Out of stock

Delivery within 7 business days:
(Moshavim, Kibbutzim, the Triangle, Judea and Samaria, Golan Heights, Eilat and East Jerusalem)

Receive an SMS on the day of delivery + a call before arrival

Description

Phrozen Sonic Mega 8KS Set


Notable advantages of the Mega 8KS over the Mega 8K model:

  1. Comes with a built-in ACF, unlike NFEP, the membrane thickness is 300 microns instead of 150.
  2. There is the ability to place the platen at 45 degrees at the end of printing, in a large printing area this feature is important to maintain a clean environment with less resin.
    In addition, it saves unnecessary waste of resin.
  3. It is possible to combine Pump & Fill, sometimes the print is larger than 1.8 liters and the pump does give an extra liter print.

Set includes:

Mega 8KS + Mega Wash + Mega cure S


Sonic Mega 8K S

  • System: Phrozen OS
  • Operation: 3.5″ Touch Panel
  • Slicer Software: CHITUBOX V1.9.6 and above (or others)
  • Connectivity: USB
  • Design: Technology Resin 3D Printer – LCD Type
  • Light Source: 405nm ParaLED® Matrix 3.0
  • Release Film: ACF Film
  • XY Resolution: 43 µm
  • Layer Thickness: 0.01-0.30 mm
  • Average Printing Speed: 600 layers/hr
  • Power Requirement: AC100-240V;50-60Hz
  • System Power: Max 240 W
  • Printer Size: L47.2 x W38 x H56.6 cm
  • Print Volume: L33 x W18.5 x H30 cm
  • Printer Weight: 26 kg

It is recommended to purchase additional equipment. If not available, we highly recommend a device that combines alcohol rinsing and UV.

The warranty is one year, excluding consumables such as FEP, screen, and leaks from improper use .

The lifespan of a screen is about 2000 hours of use when used correctly. (It can be more or less than 2000, depending on the user)

FEP is replaced after losing tension between 3-6 months of continuous use (with improper use, it can be as little as a minute).

We provide instructions on how to properly care for it to last a long time.


Phrozen Wash Mega S

An excellent washing device that fits the large sizes of Mega 8K + Mega8KS.

 

Can be filled with water, alcohol (depending on the printing material).

The device has a bottom drain opening which makes it easy to empty the device.

  • Machine Size: L39.5 x W37.5 x H48.6 cm
  • Volume 25 liters
  • Max Curing Size: Ø35 x 30 cm
  • Fan RPM: 1700 rotations/min
  • Curing Time: 1–120 min ( Recommended time: Maximum 30 minutes/cycle)
  • Input Voltage: AC100-240V; 50/60Hz
  • Machine weight: 15 kg
  • Max Power Consumption: 70 W
  • LED Specification: 405 nm

Phrozen Cure Mega S

  • Machine Size: L39.5 x W37.5 x H48.6 cm
  • Max Curing Size: Ø35 x 30 cm
  • Fan RPM: 1700 rotations/min
  • Curing Time: 1–120 min ( Recommended time: Maximum 30 minutes/cycle)
  • Input Voltage: AC100-240V; 50/60Hz
  • Machine weight: 15 kg
  • Max Power Consumption: 70 W
  • LED Specification: 405 nm

 

Prominent advantages:

  • UV also from the bottom, meaning UV from 4 directions.
  • Has a very drying function, saves drying under air pressure

In conclusion, the Sonic Mega 8KS set is a very cost-effective set.

Additionally, to register for the Facebook group we manage – 3D Printing Jewelers and Goldsmiths – the official group

For a consultation call: Moral – 0508223065

good to know

› Rolls or Resin

Half a year from the opening date

› Printers

One-year warranty in our laboratory, excluding consumables.

› 7 business day delivery (to most areas)
› Delivery within 7 business days:
(Moshavim, Kibbutzim, Triangle, Judea and Samaria, Golan Heights, Eilat and East Jerusalem)
› Receive an SMS on the day of delivery + a call before arrival

Phrozen Sonic Mega 8KS Set
Phrozen Sonic Mega 8KS Set

Out of stock