PLA 1.75 mm 5kg Luminous green – Glow in the dark green 5 kg

PLA 1.75 mm 5kg Luminous green – Glow in the dark green 5 kg

PLA absorbs UV and glows in the dark.

PLA Luminous green without UV absorption, meaning that in a dark place the effect is less significant.

UV is present in some regular lights or in the sun, a UV machine or ultraviolet light definitely charges it very quickly.

The material does not have high mechanical strength and is indeed more sensitive to moisture than PLA PRO.

For the complete guide to all raw materials, click here.

5 kg roll designed for large prints so that you can print continuously, unlike 1 kg rolls.

External dimensions of the plastic spool:

29.7 cm outer diameter

15.2 cm wide

Suitable for rods up to 3.5 cm in diameter.
It is recommended to print a dispenser if you do not have one. To download a dispenser for a 5 kg cylinder, click here…

Easy to print material, easy to model (product finish), hard, not resistant to outdoor conditions (only with sufficiently thick finishing materials),
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

PLA 5KG printing temperature:
195-220 degrees to the printer head (nozzle)
Work surface temperature – 60 degrees.
Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
For a very large product (about 100 hours of printing), it is recommended to add glue and lower the bed temperature.
Fans: 100%