PLA Yellow Peru

Temporarily in yellow stock from Promaker!!!!

PLA Yellow Pro is an easy-to-print material, easy to model (product finishing), hard, not resistant to outdoor conditions (only with sufficiently thick finishing materials), the material is most commonly used for printing because of its ease of printing and price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.

The additives in PLA PRO or PLA + or Tough PLA are the same, contains additives so that it is 10 degrees more durable and less brittle than normal PLA.

The more natural or pure and less synthetic PLA is, the less strong it is, may be good for the environment but not for the future.

In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

For the complete guide to all raw materials, click here.

Printing temperature PLA yellow
195-220 degrees to the printer head (nozzle)
Work surface temperature – 60 degrees.
Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
For a very large product (about 100 hours of printing), it is recommended to add glue and lower the bed temperature.
Fans: 100%

To our Facebook page