PLA transparent 1.75mm Elegoo

PLA transparent 1.75mm Elegoo

Elegoo 1.75mm transparent PLA filament is suitable for a variety of uses in 3D printing.

Easy to print material, easy to model (product finish), hard, not resistant to external conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

As PLA that is more natural or pure and less synthetic is less strong, it can be good for the environment but not in terms of strength.

If there is an AMS, such as in Bambulab, ARCO, or K2 Plus printers, it is recommended to purchase only rolls with a plastic spool that is suitable for the AMS.

Unlike cardboard spools, there is no need to print suitable ones and you can work at maximum speed.

For the complete guide to all raw materials, click here.

195-220 degrees to the printer head (nozzle)
Work surface temperature – 60 degrees.
Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
For a very large product (about 100 hours of printing), you can add glue and lower the bed temperature.
Fans: 100%

Plastic spool dimensions:

Diameter 200 mm

65 mm deep

The weight of the spool is about 160 grams

The roll is 1000 grams net (total weight 1.2 kg including the outer carton and spool)

To our Facebook page