White PETG -1 kg 1.75 mm

Temporarily in stock of Promaker product!!!!

Polyethylene terephthalate glycol-modified

Mechanically strong material, resistant up to about 70 degrees, a little more difficult to print than PLA (more difficult to disassemble supports), more difficult to finish a product.
This material is better known for its use in the beverage bottle industry, due to its toughness and breakability properties (more than PLA or ABS) and its specific gravity is light. This filament is odorless in the work process, due to its strength and stability in the printing process PET-G can be used to build unsupported models, which it is able to handle relatively easily.

The material does not contain petroleum like ABS, and does not require closure for the printer.
An open home printer can be used since there is no shrinkage.

It is better known for its use in the beverage bottle industry.

For the full specification PETG White Pro click here…

For the complete guide on all raw materials click here…

White PETG printing temperature:
230-250 degrees to the printer head (nozzle)
Work surface temperature – 70-85 degrees
Additionally, the fan should be turned down to 50% or turned off completely to prevent nozzle clogging (depending on the printer).
For a consultation call: Moral – 0508223065