PLA GRAY 5KG

Gray PLA 5 kg roll designed for large prints so that you can print continuously, unlike 1 kg rolls.

External dimensions of the plastic spool:

29.7 cm outer diameter

15.2 cm wide

Suitable for rods up to 3.5 cm in diameter.
It is recommended to print a dispenser if you do not have one. To download a dispenser for a 5 kg cylinder, click here…

Easy to print material, easy to model (product finish), hard, not resistant to external conditions (only with sufficiently thick finishing materials), the material is most common for printing because of its ease of printing and price.
Corn-based thermoplastic polymer. The most common material in the industry, environmentally friendly and biodegradable. This is the most preferred material, as it allows the user easier machining work.
PLA is a hard but fragile material.
In outdoor conditions, the corners sometimes warp (depending on the thickness and heat).

For the complete guide to all raw materials, click here.

PLA Gray 5KG printing temperature:
195-220 degrees to the printer head (nozzle)
Work surface temperature – 60 degrees.
Nozzle operating temperature: 210 degrees, if the nozzle is not steel (less good thermal conductivity) then 10 degrees higher.
For a very large product (about 100 hours of printing), it is recommended to add glue and lower the bed temperature.
Fans: 100%